BB1-1 M10/M8/M6 Single Post Power Battery Distribution Block

These are good quality studs for power distribution applications. Make sure you understand what you are getting. These are surface mount studs. That means the stud doesn't protrude below the surface of the mount (see photo). If you are building a battery box these wouldn't work well because the connection to the battery could not be made inside the box.

However, for surface mount applications these will work well. The nuts thread smoothly onto the studs and lock washers are provided. Four small screws are also provided for mounting.

I bought these so i could move the deep cycle battery in my row boat up to the front to distribute the weight better. I had to run longer power cables back from battery and use these to connect the trolling motor with the extension cables to the battery. They work slicker than snail snot! Good product!

Solid build. Studs come with quality washers and nuts. Make sure you get the right size for your cable lug. I used these in multiple places in my custom van and my truck.

They were perfect exactly what I needed my rear xs power battery finally died after 8yrs so I needed some sturdy post both are strong and holding up so far.

I used a pair of these to install an easy disconnect for the water pump in my travel trailer. Instead of having to rewire the next time I have to replace the pump, I just unscrew the terminal and swap out the part. Only wiring will be crimping the terminal rings to the pump wires, then screw it back on. Great purchase!